1.0TB Buffalo TeraStation v1.07β Emergency Mode Boot Log
Bootcode Ver.1.10 for [HTGL]
Build:Apr 8 2005 [17:21:18]
******* Product Information *******
----------------------------------
Product Name: HD-HTGL(YOSHIMUNE)
VER: 2.00
Date: 2005/4/7 15:31:23
----------------------------------
Firmware check:done.
>>root=/dev/hda1
hit any key to boot EM mode.
cmd_buf=root=/dev/ram0
Now Loading...done.
Now Booting
KERNELBASE=c0000000 r6=900030 r7=90003e
cmd_line=root=/dev/ram0
--- force EM mode
Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.20_mvl31-ppc_linkstation (root@hiraix) (gcc version 3.3.1 (MontaVista 3.3.1-7.0.13.0500039 2005-01-13)) #1 Thu Apr 7 15:27:02 JST 2005
BUFFALO Network Attached Storage Series
(C) 2002-2005 BUFFALO INC.
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram0
OpenPIC Version 1.2 (1 CPUs and 10 IRQ sources) at 80040000
decrementer frequency = 32.522240 MHz
FAN Control EMC6D102 initialized
Calibrating delay loop... 173.26 BogoMIPS
Memory: 125288k available (1712k kernel code, 548k data, 80k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
LSP Revision 1
Starting kswapd
Disabling the Out Of Memory Killer
Journalled Block Device driver loaded
SGI XFS 1.3.0 with no debug enabled
pty: 256 Unix98 ptys configured
BUFFALO INC. FAN driver ver 1.00
BUFFALO INC. RTC driver ver 1.00
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x80004600 (irq = 25) is a ST16650
ttyS01 at 0x80004500 (irq = 24) is a ST16650
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
IT8212: IDE controller on PCI bus 00 dev 60
IT8212: chipset revision 19
IT8212: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio
IT8212: IDE controller on PCI bus 00 dev 68
IT8212: chipset revision 19
IT8212: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xbffea0-0xbffea7, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xbffea8-0xbffeaf, BIOS settings: hdg:pio, hdh:pio
hda: WDC WD2500BB-55GUA0, ATA DISK drive
hdc: WDC WD2500BB-55GUA0, ATA DISK drive
hde: WDC WD2500BB-55GUA0, ATA DISK drive
hdg: WDC WD2500BB-55GUA0, ATA DISK drive
ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 17
ide1 at 0xbffee8-0xbffeef,0xbffee6 on irq 17 (shared with ide0)
ide2 at 0xbffec8-0xbffecf,0xbffec6 on irq 20
ide3 at 0xbffeb8-0xbffebf,0xbffeb6 on irq 20 (shared with ide2)
blk: queue c023f678, I/O limit 4095Mb (mask 0xffffffff)
hda: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100)
blk: queue c023fa00, I/O limit 4095Mb (mask 0xffffffff)
hdc: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100)
blk: queue c023fd88, I/O limit 4095Mb (mask 0xffffffff)
hde: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100)
blk: queue c0240110, I/O limit 4095Mb (mask 0xffffffff)
hdg: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1 hdc2 hdc3 hdc4
hde: hde1 hde2 hde3 hde4
hdg: hdg1 hdg2 hdg3 hdg4
RAMDISK driver initialized: 16 RAM disks of 15000K size 1024 blocksize
eth0: RTL8169s/8110s Gigabit Ethernet driver supports Jambo Frame 1.8n6 <2005-02-09> at 0xc9000f00, xx:xx:xx:xx:xx:xx, IRQ 16
eth0: Auto-negotiation Enabled.
eth0: 100Mbps Full-duplex operation.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
physmap flash device: 400000 at ffc00000
Search for id:(20 20) interleave(1) type(1)
Search for id:(20 20) interleave(1) type(1)
Search for id:(00 00) interleave(1) type(1)
Search for id:(20 5d) interleave(1) type(2)
Found: ST M29W324DB
linkstation_flash: Found 1 x16 devices at 0x0 in 8-bit mode
number of JEDEC chips: 1
Using physmap partition definition
Creating 5 MTD partitions on "linkstation_flash":
0x00000000-0x00300000 : "mtd0"
0x00300000-0x00370000 : "mtd1"
0x00370000-0x00380000 : "mtd2"
0x00380000-0x00400000 : "mtd3"
0x00000000-0x00400000 : "mtd4"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:0e.2: PCI device 1033:00e0
ehci_hcd 00:0e.2: irq 19, pci mem c9002f00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:0e.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 5 ports detected
usb-ohci.c: USB OHCI at membase 0xc9004000, IRQ 19
usb-ohci.c: usb-00:0e.0, PCI device 1033:0035
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xc9006000, IRQ 19
usb-ohci.c: usb-00:0e.1, PCI device 1033:0035
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
md: linear personality registered as nr 1
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 310.400 MB/sec
32regs : 320.000 MB/sec
raid5: using function: 32regs (320.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 0000002e]
[events: 0000002a]
[events: 00000000]
md: invalid raid superblock magic on hda4
md: hda4 has invalid sb, not importing!
md: could not import hda4!
[events: 0000002e]
[events: 0000002a]
[events: 00000000]
md: invalid raid superblock magic on hdc4
md: hdc4 has invalid sb, not importing!
md: could not import hdc4!
[events: 0000002e]
[events: 0000002a]
[events: 00000000]
md: invalid raid superblock magic on hde4
md: hde4 has invalid sb, not importing!
md: could not import hde4!
[events: 0000002e]
[events: 0000002a]
[events: 00000000]
md: invalid raid superblock magic on hdg4
md: hdg4 has invalid sb, not importing!
md: could not import hdg4!
md: autorun ...
md: considering hdg3 ...
md: adding hdg3 ...
md: adding hde3 ...
md: adding hdc3 ...
md: adding hda3 ...
md: created md1
md: bind
md: bind
md: bind
md: bind
md: running:
md: hdg3's event counter: 0000002a
md: hde3's event counter: 0000002a
md: hdc3's event counter: 0000002a
md: hda3's event counter: 0000002a
md1: max total readahead window set to 768k
md1: 3 data-disks, max readahead per data-disk: 256k
raid5: device hdg3 operational as raid disk 3
raid5: device hde3 operational as raid disk 2
raid5: device hdc3 operational as raid disk 1
raid5: device hda3 operational as raid disk 0
raid5: allocated 4334kB for md1
raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda3
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdc3
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hde3
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdg3
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda3
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdc3
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hde3
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdg3
md: updating md1 RAID superblock on device
md: hdg3 [events: 0000002b]<6>(write) hdg3's sb offset: 243481024
md: hde3 [events: 0000002b]<6>(write) hde3's sb offset: 243481024
md: hdc3 [events: 0000002b]<6>(write) hdc3's sb offset: 243481024
md: hda3 [events: 0000002b]<6>(write) hda3's sb offset: 243481024
md: considering hdg1 ...
md: adding hdg1 ...
md: adding hde1 ...
md: adding hdc1 ...
md: adding hda1 ...
md: created md0
md: bind
md: bind
md: bind
md: bind
md: running:
md: hdg1's event counter: 0000002e
md: hde1's event counter: 0000002e
md: hdc1's event counter: 0000002e
md: hda1's event counter: 0000002e
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdg1 operational as mirror 3
raid1: device hde1 operational as mirror 2
raid1: device hdc1 operational as mirror 1
raid1: device hda1 operational as mirror 0
raid1: raid set md0 active with 4 out of 4 mirrors
md: updating md0 RAID superblock on device
md: hdg1 [events: 0000002f]<6>(write) hdg1's sb offset: 385408
md: hde1 [events: 0000002f]<6>(write) hde1's sb offset: 385408
md: hdc1 [events: 0000002f]<6>(write) hdc1's sb offset: 385408
md: hda1 [events: 0000002f]<6>(write) hda1's sb offset: 385408
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1897k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 80k init
INIT: version 2.78 booting
Setting kernel variables ...
kernel.shmmax = 60000000
fs.xfs.sync_interval = 300
vm.bdflush = 40 500 0 0 500 500 60 20 0
... done.
[: 0: unexpected operator
Mounting local filesystems...
none on /dev/pts type devpts (rw,gid=5,mode=20)
Cleaning: /tmp .
Configuration network interface: lo eth0
INIT: Entering runlevel: 3
Starting ls_servd:starting on eth0
start start_server()
Start services: mc_ctld
BUFFALO INC. TeraStation series HD-HTGL (YOSHIMUNE)
HD-HTGL-EM login: